CAT D6N

Overview The latest in the line of Cat D6N dozers combines well-known versatility with a range of technology features to give you more job site productivity than ever before. A new transmission with lock-up clutch torque converter delivers ease of operation, increased net power, plus a 10-15 percent improvement in fuel efficiency. The D6N has the weight and horsepower you want for dozing applications and the balance and stability you need for finish grading – all in one easy-to-transport machine. Engine Engine Model Cat® C7.1 ACERT™ Flywheel Power 124.0 kW Bore 105.0 mm Stroke 135.0 mm Displacement 7.1 l Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final Engine Power - Maximum - At 2,200 rpm - ISO 14396 133.0 kW Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN) 133.0 kW Engine Power - Maximum - At 2,200 rpm - SAE J1995 136.0 kW Net Power - 1,800 rpm - ISO 9249/SAE J1349 124.0 kW Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN) 124.0 kW Note (1) Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed. Note (2) No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs. Note (3) All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. Note (4) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Transmission 1.0 Forward 3.3 km/h 1.5 Forward 4.4 km/h 2.0 Forward 5.8 km/h 2.5 Forward 7.5 km/h 3.0 Forward 9.8 km/h 1.0 Reverse 4.1 km/h 1.5 Reverse 5.4 km/h 2.0 Reverse 7.1 km/h 2.5 Reverse 9.5 km/h 3.0 Reverse 12.2 km/h 0.5 Forward 2.5 km/h 0.5 Forward (EU) 2.4 km/h 0.5 Reverse 3.1 km/h 0.7 Forward 2.8 km/h 0.7 Forward (EU) 2.7 km/h 1.0 Forward (EU) 3.0 km/h 1.7 Forward 4.9 km/h 2.7 Forward 8.3 km/h 0.5 Reverse (EU) 2.9 km/h 0.7 Reverse 3.4 km/h 0.7 Reverse (EU) 3.1 km/h 1.0 Reverse (EU) 3.5 km/h 1.7 Reverse 6.0 km/h 2.7 Reverse 10.5 km/h Maximum Drawbar Pull - 1.0 Forward 320.0 kN Maximum Drawbar Pull - 2.0 Forward 198.0 kN Maximum Drawbar Pull - 3.0 Forward 113.0 kN Service Refill Capacities Fuel Tank 277.0 l Cooling System 40.0 l Engine Crankcase 17.0 l Power Train 160.0 l Final Drive - Each 7.0 l Hydraulic Tank 29.5 l DEF Tank 19.0 l Roller Frames XL/LGP - Each 20/17.5 L (4.3/4.6 gal) Weights Operating Weight 16757.0 kg LGP VPAT - Blade 1234.0 kg LGP VPAT - Foldable 1491.0 kg LGP VPAT - Landfill 1436.0 kg Multi-Shank Ripper - With 3 Shanks 1342.0 kg Operating Weight - LGP 18346.0 kg Operating Weight - XL 16757.0 kg Shipping Weight - LGP 17844.0 kg Shipping Weight - XL 16399.0 kg XL SU - Blade 2600.0 kg XL VPAT Blade 1062.0 kg XL VPAT Foldable 1253.0 kg XL VPAT Landfill 1321.0 kg Note (1) Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator. Note (2) Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat. Operating Weight - LGP Waste Handler 20298.0 kg Operating Weight - XL Fine Grading 17310.0 kg Operating Weight - XL Waste Handler 18515.0 kg Shipping Weight - LGP Waste Handler 19796.0 kg Shipping Weight - XL Fine Grading 16952.0 kg Shipping Weight - XL Waste Handler 18157.0 kg Undercarriage Ground Contact Area* - LGP 5.76 m² Ground Contact Area* - XL 3.56 m² Ground Pressure - LGP* 31.2 kPa Ground Pressure - XL* 46.1 kPa Grouser Height - LGP 57.0 mm Grouser Height - XL 66.0 mm Note (1) *ISO 16754 Shoe Width - LGP 840.0 mm Shoe Width - XL 610.0 mm Shoes/Side - LGP 46 Shoes/Side - XL 40 Track Gauge - LGP 2160.0 mm Track Gauge - XL 1890.0 mm Track Rollers/Side - LGP 8 Track Rollers/Side - XL 7 Track on Ground - LGP 3110.0 mm Track on Ground - XL 2605.0 mm Ground Contact Area* - XL - Fine Grading 4.18 m² Ground Pressure* - XL - Fine Grading 40.3 kPa Grouser Height - XL - Fine Grading 66.0 mm Note (2) All dimensions with SystemOne undercarriage. Shoe Width - XL - Fine Grading 610.0 mm Shoes/Side - XL - Fine Grading 46 Track Gauge - XL - Fine Grading 1890.0 mm Track Rollers/Side - XL - Fine Grading 8 Track on Ground - XL - Fine Grading 3110.0 mm Blades Capacity - LGP VPAT 3.9 m³ Capacity - LGP VPAT - Foldable 3.9 m³ Capacity - XL SU 4.3 m³ Capacity - XL VPAT 3.3 m³ Width - LGP VPAT 4080.0 mm Width - LGP VPAT - Foldable 4080.0 mm Width - XL SU 3154.0 mm Width - XL VPAT 3272.0 mm Ripper Each Additional Shank 78.0 kg Maximum Clearance Raised - Shank Tip 622.0 mm Maximum Penetration - LGP 398.0 mm Maximum Penetration - XL 514.0 mm Maximum Penetration Force - LGP 43.0 kN Maximum Penetration Force - XL 51.6 kN Maximum Pry-out Force - LGP 170.0 kN Maximum Pry-out Force - XL 211.2 kN Pocket Spacing 1000.0 mm Shank Gauge 2.0 m Shank Section 73 mm × 176 mm (2.9 in × 6.9 in) Weight - With Three Shanks 1562.0 kg Type Fixed Parallelogram Number of Pockets 3 Overall Beam Width 2202.0 mm Beam Cross Section 216 mm × 254 mm (8.5 in × 10.0 in) Winch Cable Ferrule Size - O.D. × Length 54 mm × 67 mm (2.13 in × 2.63 in) Control Electric Drum Capacity - 22 mm (0.88 in) 88.0 m Maximum Bare Drum - Line Pull* 31389.0 kg Maximum Bare Drum - Line Speed 43.0 m/min Maximum Full Drum - Line Pull* 20144.0 kg Maximum Full Drum - Line Speed 66.1 m/min Overall Width 975.0 mm Rope Diameter - Recommended 22.0 mm Winch Case - Width 975.0 mm Winch Drive Mechanical Winch Model PA55 Note (1) *Weight: Includes pump, operator controls, oil, mounting brackets and spacers. Note (2) Slow and standard speed winches are available. Weight* 1276.5 kg Oil Capacity 74.0 l Winch and Bracket Length 1145.0 mm Drum Diameter 254.0 mm Drum Width 315.0 mm Flange Diameter 504.0 mm Standards FOPS FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II. ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. Brakes Brakes meet the standard ISO 10265:2008. Sustainability - Sound and Vibration Levels Note *Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details. Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006 85.5 dB(A) Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008 76.0 dB(A) Sound Levels - Maximum Sound Power Level - 2000/14/EC 110.0 dB(A) Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001 2.5 m/s2 (8.2 ft/s2) Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006 0.5 m/s2 (1.6 ft/s2) Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6 Less Than 0.7 Air Conditioning System Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. Hydraulic Controls - Pressures Maximum Implement Operating Pressure 25100.0 kPa Maximum Steering Operating Pressure 45200.0 kPa Hydraulic Controls - Pump Angle Cylinder Flow - VPAT 127.0 l/min Lift Cylinder Flow 127.0 l/min Pump Output - Implement 127.0 l/min Pump Output - Steering 137.0 l/min Ripper Cylinder Flow 127.0 l/min Tilt Cylinder Flow 90.0 l/min Sound and Vibration - Cab Sound Level Information (1) The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when “ANSI/SAE J1166 FEB2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. Sound Level Information (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment. Sound Level Information (3) The average exterior sound pressure level is 85.5 dB(A) when the “SAE J88 FEB2006 – Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “the machine moving forward in an intermediate gear ratio.” Specification Name Too Long The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: This dynamic operator sound pressure level is associated to a 2 dB(A) uncertainty. Specification Name Too Long If equipped, the certification label – 110 dB(A) – is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in “2000/14/EC.” Your machine may have a different value

Make CAT
Model D6N
Year
Hours
Stock No. GPHDZD6N01
Daily Login or Sign up to view prices
Weekly Login or Sign up to view prices
Weekend Login or Sign up to view prices
Monthly Login or Sign up to view prices